Remove Screen Lock Password On Samsung J7 Pro SM-J730G Without Data Loss

If you have a Samsung Galaxy J7 Pro SM-J730G with a forgotten screen lock password, on binary 5 and FRP ON, you can successfully remove the screen lock password without losing your data on the device.

This short tutorial on how to remove screen lock password on Samsung Galaxy J7 Pro SM-J730G(Binary 5) without data loss will work even with FRP(factory reset protection) ON.

To successfully remove lock screen password, pattern or PIN on the Samsung Galaxy J7 Pro SM-J730G on U5 binary, follow the step by step instruction below.

How To Remove Screen Lock Password On Samsung Galaxy J7 Pro SM-J730G U5 Without Data Loss

Step 1: Download and install Samsung USB drivers on your PC

Step 2: Download and extract Odin flashing tool to access the folder

Step 3: Download this firmware file (J730GDXU5BRI3_J730GOLB5BRI3_XTC) and extract it to access the files inside (STEP1.tar and STEP2.tar)

Step 4: Put your Samsung Galaxy J7 Pro SM-J730G into Download mode by pressing Volume Down + Home button + Power button, let go of the power button and press volume up to confirm booting into Download/Odin mode

Step 5: Connect your Samsung J7 Pro to the PC via a USB data cable

Step 6: Open Odin from the Odin file folder you extracted in step 2

Step 7: Click on AP, locate and select STEP1.tar from the firmware folder you extracted.

Step 8: Click on the Start button to flash the file.

NOTE : After flashing the STEP1.tar, the phone will restart, but make sure you quickly press Volume Down + Home button + Power key to boot it back to Download mode.

Step 9: Close and reopen Odin again, then load the STEP2.tar file via AP and flash it too. Your Samsung J7 Pro will restart. If it boots into recovery mode, just scroll down and Wipe Cache, then reboot the device.

Step 10: Once your phone boots up, you can access your data again and also do a backup to keep the files safe. For your device to be more stable after the screen lock password bypass/reset, you should flash/reinstall the stock firmware again via Odin. Download the stock firmware for the Samsung Galaxy J7 Pro SM-J730G from this link J730GDXU5BRI3_J730GOLB5BRI3_XXV_8.1_FULL and you can follow the flashing procedure for Samsung phones via Odin from here.

Leave a Comment