If you are a Samsung user who has in one way or the other tried to make advanced changes to your device like rooting it or something else, you might have come across the popular error on Samsung Galaxy devices which says “recovery is not seandroid enforcing“. or kernel is not seandroid enforcing or Recovery booting, recovery is not seandroid enforcing, Set Warranty Bit: recovery
The error can be seen on your device in the upper left of your screen written in red colour, you will also be unable to boot up your Samsung phone when this error shows up.
Well, this post is all about making sure you fix the recovery/kernel is not seandroid enforcing error on your Samsung phone before you leave this page.
Before we begin telling you the steps to fix the recovery/kernel is not seandroid enforcing error on your Samsung galaxy phone, wouldn’t it be nice if you know what causes the error?
Before we move on, it will be cool if you knew a little bit about SEAndroid.
Well, SE(Security Enhanced) Android
Security Enhanced (SE) Android. What is that, I wondered? Time for another in our What is…? series, looking at aspects of Android technology that are somewhat beneath the radar.
Security, security, security
SE Android originated with the (US) National Security Agency. It soughts to address the increasing use of mobile devices throughout government bodies, along with a perceived need for improved security. Android was chosen, for its widespread use and the openness or adaptability of the platform.
Basically, the goal is to stop mobile apps granting themselves extra privileges, or prevent apps from sharing too much data, or prevent the bypass of security features.
Good, let’s hit the road!
The recovery/kernel is not seandroid enforcing error on Samsung devices can be caused by any of the followng:-
- Recovery is not Seandroid Enforcing error on Samsung phones could occur when you are trying to root your Samsung device with a wrong file which is not compatible with your current firmware.
- Recovery is not Seandroid Enforcing error often happens when you try to root your phone or flash a custom ROM to your Samsung phone.
For example, lets say you installed a 4.3 TWRP recovery on an Android 4.4 phone or you rooted your phone on Android 5.1 with a CF-Auto-Root file that’s meant for Android 5.0.2, you will be welcomed with the recovery is not Seandroid enforcing error.
How to Fix Recovery/Kernel is not Seandroid Enforcing Error on Samsung Phones
If you are facing the recovery is not seandroid enforcing error on your Samsung phone, which is preventing you from booting your device normally, then you are on the right page.
Here are the different options or methods to fix the recovery is not seandroid enforcing error on a Samsung galaxy phone.
Method 1 – Perform a Factory Reset(Wipe Data and Cache)
The first method to fix the recovery or kernel is not seandroid enforcing error on Samsung phones is to perform a factory data reset and this works straight-up for most devices.
To perform a factory reset on your Samsung device, since it doesn’t boot up properly, you will use the hardware keys combination. Here’s how to perform a factory reset on your Samsung Galaxy phone.
Step 1: Power off your Samsung phone by pressing the power button for some seconds or remove and reinsert the battery if it has a removable battery.
Step 2: Press and hold the following buttons together; Volume up + Home or Bixby button + Power button and let go of the power button once it shows the Samsung logo while still pressing the other buttons until you see the recovery screen. Use the Volume Up and Down keys to navigate and press the Power button to select the option.
Step 3: Navigate to Wipe data/factory reset option and select it using the Power key.
Select Yes on the confirmation screen. Wait for the reset to be done. You can also wipe the Cache partition too.
Step 4: Finally, select Reboot system now to boot into the Android system.
And that’s all. The device should reboot and be fine without the error that’s preventing it from booting.
Method 2 – Flash or Reinstall the stock firmware or ROM to the Samsung phone via Odin
The second method to successfully fix the Recovery/Kernel is not Seandroid Enforcing Error is to reinstall the stock firmware back to the Samsung device. This is a better fix because you will be completely overwriting every modified file with the stock firmware and you will also lose root access after the firmware installation.
To reinstall the stock firmware back to your Samsung device, here are what you need to do and the requirements.
- Download the latest version of Odin and unzip it to your PC
- Install Samsung USB drivers
- Download the stock firmware that matches your Samsung phone’s model and extract the archived file
- Put your phone in download mode using Volume down, power and home button/bixby button if it’s available
- Connect your device in Download mode to your PC
- Open Odin flash tool from the extracted folder
- Click on PDA/AP and select the flash file you have already
- It will load completely after a while, depending on the size of the flash file
- Click on Start button to begin the firmware installation
- When it’s done, your phone will reboot. You can also still perform a factory reset after the flashing.
That’s all you can do to fix the kernel is not seandroid enforcing or recovery is not seandroid enforcing error on your Samsung galaxy phone.